RTM Tooling Materials And Ancillaries
| Item Description | Item # | Price |
 Latch Clamp. To assist initial closure of peripheral
vacuum seal. Can be screwed to mould edge
wooden frame or welded to steel frame. Complete
with drawing showing set up. |
3370 | $26.89 Quantity: |
 Mould clamp set - male & female dowel set complete
with M24 nuts & bolt |
2653 | $63.47 Quantity: |
 Air Ejector Designed to be bonded flush with mould face. In
operation it retracts the face and simultaneously forces
compressed air between the mould and moulded part. |
0580 | $113.78 Quantity: |
 Control button and fittings for air ejector complete with air pipes |
1949 | $101.38 Quantity: |
| Mould clamp set - male & female dowel set only | 719 | $52.27 Quantity: |
| Toggle Clamp Assembly | 2654 | $115.20 Quantity: |
| Toggle clamp handle | 2655 | $19.20 Quantity: |
| Insert-sprue/Vent hole - case hardened (For use with vent liner, vacuum plug, sprue plug). | 123 | $10.88 Quantity: |
| Vent liner PTFE 1/2" to 6mm | 120 | $20.27 Quantity: |
| Vacuum plug assembly - for 6mm and 10mm pipe | 2628 | $26.88 Quantity: |
| Insert adapter (to convert from Autosprue to manual injection) | 94 | $23.04 Quantity: |
| Demould water hammer | 126 | $76.80 Quantity: |
| Sprue plug PTFE complete | 121 | $22.72 Quantity: |
| Sprue plug PTFE replacement tip | 122 | $16.00 Quantity: |
| Vent shut off pin | 124 | $25.17 Quantity: |
| Tooling surface tissue 30g / m2 | 1082 | $1.28 Quantity: |
