Technical Data - Megaject IV
The precision fluid section achieves a mix output from 150grm/min to 12kg/min and offers a variable catalyst ratio, solvent flush with alarm, resin and catalyst recirculation at the head and a number of machine options unique to Plastech's Megaject range. The MegajectTM MkIV will inject resin and catalyst at controlled pressures. The machine mixes on demand at the injection head, with catalyst ratios adjustable from 0.5% to 4.5% in increments of 0.25%.
Features
- Full instrumentation and control panel, housed in lockable a steel cabinet.
- Precision fluid pumps guarantee accurate metering across full output range.
- MPG - Mould Pressure Guard this constantly regulates the injection pressure to ensure fast and safe mould fill.
- Gel warning timer with alarm.
- Timed solvent flush of machine head (cancels gel timer).
- Catalyst over-pressurisation automatic machine safety stop.
- Manual Resin and Catalyst recirculation valves at mixing head with safety interlocks.
- Resin inlet hose and filter suitable for 200kg drum and 8ltr catalyst bottle with filtered line.
- Pre-determining stroke counter (PDC). 100cc resolution.
- Complete 2 stream mixing head with static mixer element and air/solvent/air cleaning system.
- Frame mounted 20 litre non-pressurised solvent tank with submersed solvent pump system, SP3.
- Highly efficient solvent/air emulsifier ensuring lower solvent consumption per head flush.
- Tough powder coated frame with heavy-duty lockable castors.
- 4m umbilical to head.
- Built-in mould vacuum service facility.
- Machine shuts down upon emergency stop and air failure with automatic reset to safe mode on restart.
- Machine guards with interlocks complying with CE Machinery Directive regulations.
- Designed to connect to Turbo Autosprue and PVSensor System.
